Top Furnace Maintenance Tips And Tricks

The heating system consumes the biggest share of energy in your home. On average, the heating system constitutes 45 percent of your home’s energy bills. That’s why you should ensure that your furnace of functioning optimally. This will bring down the energy bills in your home. Bring in the right filter. The 16x25x1 furnace filter will optimize the efficiency of your furnace. Use the following furnace maintenance tips and tricks to make your home energy efficient.

Clean, Replace Filter

A furnace filter is typically designed to remove harmful particles from the air. It can get rid of dust, spores, pollen, and bacteria, as well as, pet dander. They trap a high percentage of these particles, hence keeping the air around your home clean and fresh. And this in turn helps in keeping you healthier and happier.

However, if the air filters get clogged with dirt, they might impede airflow. Your furnace will become inefficient and there’ll be inadequate airflow. So, it’s always advisable to clean your air filters regularly. Essentially, air filters should be replaced after every 30 to 90 days.

Blower Motor

Check if your furnace blower motor is well-functional. It’s responsible for supplying air to the furnace, as well as, the air conditioning system. Plus, it has numerous working parts, which if not properly maintained can easily break down.

High, shrill sounds might signal a problem with the blower motor. The blower wheel could be loose or two parts could be grinding against each other. If this issue persists, it could lead to permanent damage. A trained professional can help locate such faults and get them fixed immediately.

Reduce Heating Load

Devise measures to minimize heat loss. Seal up its envelope to reduce heat load. Any weakness in your home’s structural shell could allow cold air to leak in or warm air to seep out. Hire an HVAC contractor to perform an energy audit to establish potential sources of heat loss.

Some of the possible solutions include installing weather stripping windows, adding insulation to your duct and attic, as well as, sealing open spaces.

Free Vents

Make sure that your furnace is fully operational. For efficient airflow, the vents should also be working properly. Adjust all vents in your home to ensure that air circulates freely. A blocked vent can force the furnace to work harder and inefficiently.

Make Sure That the Exhaust Flue Is Clear

You also need to pay close attention to your exhaust flue. Common gases that are produced by your furnace include carbon monoxide, sulfur dioxide, as well as, nitrogen dioxide.

If the exhaust flue gets blocked, problems can quickly occur. The gases can cause hazardous health effects, including headaches, nausea, fatigue, dizziness, unconsciousness, collapse, and even death. If you feel there’s a problem with your exhaust flue, don’t hesitate to contact your HVAC contractor.

The Bottom-Line

Huge energy bills can be annoying. They can drain you financially. Thus, zeal all the loopholes. Bring in energy-efficient appliances. Ensure that your home is insulated. Make sure that your furnace is functioning optimally. Maintain it well with the above tips and tricks. 

Photo by Erik Mclean on Unsplash